Crown GPC 2040-S Low Level Order Pickers For Sale

We have 7 pre-owned Crown GPC 2040-S low level order pickers in stock. These were produced in 2005. All come with battery chargers and only one is not in working condition.

Crown GPC 2040-S low level order pickers

Crown GPC 2040-S specifications:

• 4000 lb. load capacity
• 24V battery, type E
• 600 AMP hrs, 6 hr. charge rate
• 2060 lbs. with battery, 1840 lbs. without battery

You can call to request serial numbers and logged work hours. We have a user manual on hand. Users are able to ride on or walk beside the GPC 2040-S. If you could use an application-specific fork truck for low level picking, you won't find better than these pre-owned Crown GPC-2040-S order pickers. They ship from Sparta, MI 49345.

Contact Speedrack Midwest today online or at 616-887-3576!

Used Paltier pallet rack PLUS Paltier ID guide!

If you're one of the folks out there who is still using Paltier pallet rack then you're always on the lookout for some high quality used equipment. Luckily for you we just got in a batch of excellent used load beams and uprights for Paltier pallet rack. Sizes are listed below.

Paltier Load Beams:

• 4" x 95-3/4" Slotted Beams, 3 Lugs, Built In Spring Clip, 3/4" Step
• 3-1/2" x 95-3/4" Slotted Beams, 3 Lugs, Built In Spring Clip

Paltier 3-1/2" x 95-3/4" Slotted Beams

Paltier Uprights:

• 33-1/2" x 96" Uprights, 3 x 1-5/8 Open Back Column
• 35-1/4" x 92-1/4" Uprights, 3 x 1-5/8 Open Back Column
• 35-1/4" x 96" Uprights, 3 x 1-5/8 Open Back Column

Paltier 33-1/2" x 96" Uprights

Correctly Identify Paltier Pallet Rack and Avoid a Common Mistake

It helps to know that Paltier pallet rack can very easily be mistaken for the much more ubiquitous style of teardrop pallet rack. Load beams are easy to differentiate by their connector plates; the problem lies in the uprights. Use the tips below to correctly identify Paltier pallet rack before adding onto your system.

The holes punched in Paltier uprights are thinner than teardrop holes and are also individually symmetrical. The image below shows you the hole pattern on the front of a Paltier upright column.

Paltier-style hole pattern

Compare that to a standard teardrop hole pattern. Notice that the holes are wider and the tapering of each individual hole is asymmetrical, with a smooth curve on the outside and a slight pinch on the inside. If the holes appear to pinch toward one another like you see here, you have teardrop rack.

Teardrop-style hole pattern

You may find that Paltier load beams fit into teardrop uprights. That may be so; they may fit into the holes, but they will not secure properly. An approximate match is never the right match. We always urge you to use compatible components when assembling pallet rack, and never to mix styles.

If you ever have a question about your current pallet rack, please consult us and we will figure out what you need. For those who are interested in our used Paltier pallet rack, call us at 616-887-3576 or contact us online!

Light duty Interlake pallet rack new in stock

We just got in a large shipment of used teardrop load beams and wire mesh deck from a single facility that would work beautifully in a new application. All equipment is in excellent shape. If you have a use for light duty storage, let us know!

• Interlake 2 1/4" x 90" teardrop load beams, 3/4" step, 2 round rivets, slidelock
• Interlake 2 1/4" x 66" teardrop load beams, 3/4" step, 2 round rivets, slidelock
• Interlake 2 1/4" x 36" teardrop load beams, 3/4" step, 2 round rivets, slidelock

Interlake 2 1/4" x 90" teardrop pallet rack load beams

2 round rivets per end plate

3/4" step beams

48" D x 42" W wire mesh deck;  45 3/4" L channel, 3/4" notch step

Used 48" D x 42" W wire mesh deck

45 3/4" L channel, 3/4" step

Contact us to get a quote on this excellent pre-owned rack today.

New 42" x 192" and 48" x 192" Teardrop Uprights In Stock

New 42" x 192" and 48" x 192" Teardrop Uprights in Stock

Speedrack manufactured 42" x 192" teardrop uprights

We've stocked up our Sparta warehouse with new Speedrack K-1000 teardrop uprights, including the standard 42" D x 192" H size and the deeper 48" D x 192" H frames.

Why should you choose these K-1000 uprights? Well for one thing, the K-1000 is the strongest kind of teardrop rack you can find, its closed column design resisting torsion more than 200 times over any other style of rack with open back columns.

Secondly, our K-1000 teardrop pallet rack is compatible across the board with all other teardrop rack. Shaved or round rivets work just fine, so you don't need to worry about wobbly load beams when you install K-1000's in your warehouse.

3" x 2 3/4" closed column design for maximum strength

Superior project management and customer service

These 42" D and 48" D uprights will work with many standard systems, but we're committed to supplying you with the correct equipment. Before you purchase, we'll make sure that these uprights,or any pallet rack for that matter, will work with your existing system. In order to give you the best new storage solution, we'll work with you to research your building and shipping procedures to design a system that delivers the highest level of safety and efficiency.

Email or call us at 616-887-8886 to order these 42" x 192" or 48" x 192" teardrop uprights, or to discuss different available rack sizes and custom pallet rack solutions. Get a fresh start today!

Unarco T-Bolt Carton Flow & Pallet Flow System

Coming out of the gate of our New Jersey warehouse liquidation is this carton flow and pallet flow system built in Unarco T-bolt pallet rack. All parts are in excellent condition and very clean.

Unarco T-Bolt pallet rack with carton flow & pallet flow

Specifications

• 30 total bays, 96" D x 96" W x 240" H each

5-level carton flow rack

Carton flow

• 5 levels
• 8 lanes
• 2 track per, plus dividers

Push back rack above carton flow

Push back

• 2 pallets deep, 2 wide, 2 high

Unarco T-Bolt uprights

• 72 frame lines
• 96" D x 96" W x 240" H (54" D uprights plus single post)
• 4" W x 3" D posts
• 8" W x 7" D base plates

Complete system in excellent condition

System Price: $23,220.00

Available in 1 week

Ships FOB Union, New Jersey

Contact Ron Ducharme Jr at 616-887-7543 or rlducharmejr@speedrackmidwest.com

Custom-built aluminum safety barriers and enclosures

Maytec aluminum enclosure with wire woven mesh

If you're in search of a solution for machine and perimeter guarding, safety fencing, or security gating, a custom-built safety barrier may be just what you need. Through a number of strategic partnerships, we can offer custom-built solutions to establish a clear line of separation between humans and valuable property or dangerous machinery.

Locking enclosure for secure tool storage

Take this for example. A client of ours that works in public utilities asked for a secure enclosure to store tools in its vehicle service garage. The company was expanding its fleet services so wanted a higher degree of organization to help its workers. We constructed a simple locking mesh enclosure with peg boards and room for storage cabinets in an area with wide clearance and high visibility.

Aluminum extruded parts slot together for easy assembly

In addition we provided double stacked cages for further equipment storage along an interior wall. All in all, this represents a myriad of possibilities in which barriers and enclosures can boost your company's efficiency by improving its security.

Modular locking cages serve as centralized equipment storage units

Faztek and Maytec aluminum extrusions are some of the products we use to design your custom-built solutions. Not only are you getting the most durable solutions, but ones that can be built to order and quickly assembled. Contact us at 616-887-8886 to order your custom-built safety barrier today.

Speedrack sponsors Clint King in the ARCA Racing Series at Berlin Raceway

King at Berlin Raceway 2011

Driver Clint King returns to the ARCA Racing Series tomorrow Saturday, August 10, driving the No. 55 car, sponsored by Speedrack and our good partner Nashville Wire Products.

We're thrilled to have King's back as he makes his season debut tomorrow at Berlin Raceway in Marne.

King says, "I'm excited to get back behind the wheel this weekend. It's been a tough season with limited opportunities, but thanks to my sponsors, Speedrack and Nashville Wire, I'm able to rejoin the team this weekend at Berlin and hopefully pick up where we left off."

It's been a year since King's last ARCA Racing start in Madison, Wisconsin, but now he's back in action, in town, for us to cheer him on. And on $1 beers and hot dogs night too!

Make it out if you can. We don't know how you pick your favorite driver, but we'll be rooting for #55 all night in the Primera Plastics 200.

Good luck, Clint!