Thursday, October 17, 2013

New 42" x 192" and 48" x 192" Teardrop Uprights In Stock

New 42" x 192" and 48" x 192" Teardrop Uprights in Stock

Speedrack manufactured 42" x 192" teardrop uprights
We've stocked up our Sparta warehouse with new Speedrack K-1000 teardrop uprights, including the standard 42" D x 192" H size and the deeper 48" D x 192" H frames.

Why should you choose these K-1000 uprights? Well for one thing, the K-1000 is the strongest kind of teardrop rack you can find, its closed column design resisting torsion more than 200 times over any other style of rack with open back columns.

Secondly, our K-1000 teardrop pallet rack is compatible across the board with all other teardrop rack. Shaved or round rivets work just fine, so you don't need to worry about wobbly load beams when you install K-1000's in your warehouse.

3" x 2 3/4" closed column design for maximum strength

Superior project management and customer service

These 42" D and 48" D uprights will work with many standard systems, but we're committed to supplying you with the correct equipment. Before you purchase, we'll make sure that these uprights,or any pallet rack for that matter, will work with your existing system. In order to give you the best new storage solution, we'll work with you to research your building and shipping procedures to design a system that delivers the highest level of safety and efficiency.

Email or call us at 616-887-8886 to order these 42" x 192" or 48" x 192" teardrop uprights, or to discuss different available rack sizes and custom pallet rack solutions. Get a fresh start today!

Friday, September 20, 2013

Unarco T-Bolt Carton Flow & Pallet Flow System

Coming out of the gate of our New Jersey warehouse liquidation is this carton flow and pallet flow system built in Unarco T-bolt pallet rack. All parts are in excellent condition and very clean.

Unarco T-Bolt pallet rack with carton flow & pallet flow


  • 30 total bays, 96" D x 96" W x 240" H each
5-level carton flow rack

Carton flow

  • 5 levels
  • 8 lanes
  • 2 track per, plus dividers
Push back rack above carton flow

Push back

  • 2 pallets deep, 2 wide, 2 high

Unarco T-Bolt uprights

  • 72 frame lines
  • 96" D x 96" W x 240" H (54" D uprights plus single post)
  • 4" W x 3" D posts
  • 8" W x 7" D base plates
Complete system in excellent condition

System Price: $23,220.00

Available in 1 week

Ships FOB Union, New Jersey

Contact Ron Ducharme Jr at 616-887-7543 or

Thursday, August 29, 2013

Custom-built aluminum safety barriers and enclosures

Maytec aluminum enclosure with wire woven mesh
If you're in search of a solution for machine and perimeter guarding, safety fencing, or security gating, a custom-built safety barrier may be just what you need. Through a number of strategic partnerships, we can offer custom-built solutions to establish a clear line of separation between humans and valuable property or dangerous machinery.

Locking enclosure for secure tool storage
Take this for example. A client of ours that works in public utilities asked for a secure enclosure to store tools in its vehicle service garage. The company was expanding its fleet services so wanted a higher degree of organization to help its workers. We constructed a simple locking mesh enclosure with peg boards and room for storage cabinets in an area with wide clearance and high visibility.

Aluminum extruded parts slot together for easy assembly
In addition we provided double stacked cages for further equipment storage along an interior wall. All in all, this represents a myriad of possibilities in which barriers and enclosures can boost your company's efficiency by improving its security.

Modular locking cages serve as centralized equipment storage units
Faztek and Maytec aluminum extrusions are some of the products we use to design your custom-built solutions. Not only are you getting the most durable solutions, but ones that can be built to order and quickly assembled. Contact us at 616-887-8886 to order your custom-built safety barrier today.

Friday, August 9, 2013

Speedrack sponsors Clint King in the ARCA Racing Series at Berlin Raceway

King at Berlin Raceway 2011
Driver Clint King returns to the ARCA Racing Series tomorrow Saturday, August 10, driving the No. 55 car, sponsored by Speedrack and our good partner Nashville Wire Products.

We're thrilled to have King's back as he makes his season debut tomorrow at Berlin Raceway in Marne.

King says, "I'm excited to get back behind the wheel this weekend. It's been a tough season with limited opportunities, but thanks to my sponsors, Speedrack and Nashville Wire, I'm able to rejoin the team this weekend at Berlin and hopefully pick up where we left off."

It's been a year since King's last ARCA Racing start in Madison, Wisconsin, but now he's back in action, in town, for us to cheer him on. And on $1 beers and hot dogs night too!

Make it out if you can. We don't know how you pick your favorite driver, but we'll be rooting for #55 all night in the Primera Plastics 200.

Good luck, Clint!

Wednesday, July 24, 2013

Hytrol Conveyor Leg Supports on Sale

One of our latest jobs left us with surplus Hytrol conveyor leg supports. This equipment is all in like-new condition, and we want to move it immediately. See for yourself what great condition they're in.

  • (15) Hytrol 24” W x 45-55” H conveyor leg supports: $47.36 each
  • (24) Hytrol 24-34” H center curve supports: $35.20 each
  • (10) Hytrol 24” W x 50-60” H conveyor leg supports: $47.36 each
  • (16) Hytrol 30” W x 24-30” H conveyor leg supports: $35.20 each
  • (11) Hytrol 26” W x 35-48” H conveyor leg supports: $44.14 each 

If you're interested, call Bill Grew at 616-887-7535. In addition to these we have used conveyor leg supports in stock too. Let us know what you're looking for.

Thursday, July 11, 2013

Speedrack Midwest welcomes new account manager Bill Grew

We’re happy to welcome Bill Grew to our team at Speedrack Midwest. Bill is joining our sales office as an account manager and specializes in conveyor systems and design, bringing 20 years of experience in the material handling industry. He will help you tackle your most pressing material handling problems with excellent design and engineering expertise.

Welcome aboard, Bill!

Area of expertise?
Conveyor systems and design

What do you hope to bring to Speedrack Midwest?
A meticulous attention to established and emerging technologies that will offer our customers cost-effective solutions to their material handling needs

Where did you attend school?
Embry-Riddle Aeronautical University

What did you major in?
Airframe management

Interests outside of work?
Mountain biking, kayaking, hiking, camping

Your first job?
United States Air Force

Harrison Ford in Air Force One or Bill Pullman in Independence Day?
Harrison Ford